Product Specification
| Brand | Nerolac |
| Usage/Application | Used on interior surfaces such as concrete, brickwork, cement rendering, concrete, hardboard, building boards, smooth plaster etc. |
| Paint Type | Emulsion |
| Packaging Type | Bucket |
| Finish | Metallic finish |
| Coverage | 5.57-7.43 sq.ft/ltr/coat when applied to smooth and non-absorbent surface (by felt roller) |
| Drying time | 60-90 minutes (Surface dry) |
| No. Of Shaded Possible | More than 33 |
| Thinning | Max 5% by volume using water. |
| Stability Of Thinned Paint | Use within 24 hours |
| Sheen Level | Sheen |
| Recoating | Min. 4 -6 hrs (@27 +/-2 Degree Celsius and RH 60 +/-5% |
| Flash Point | NA |
| Packaging Size | 500 ml, 1 ltrs, 4 ltrs |
Product Description
Nerolac Impressions Metallic Finish Emulsion Wall Paint is a premium-quality, special effect designer series range that creates a variety of special effects and textures on interior walls and is based on pure acrylic emulsion.
Performance Features & Benefits
- Can make various designs with Different Application Tools
- Workability.
- Excellent Stain Resistance
- Excellent Washability
- Non-Flammable
- Very Good Antifungal Resistance
Surface Preparation
- Rub the surface using a suitable abrasive paper and wipe it off to ensure that the surface is clean, dry and free from dirt, grease, wax or any other defective or poorly adhering material.
- Treat Fungus affected areas using Nerolac Fungicidal Solution and allow it to react for 6-8 hrs.
- Apply a coat of Nerolac Cement Primer (water thin) followed by Nerolac Wall Putty/Nerolac Cement Putty to level and smoothen the surface.
- Sand the emery surface 220 and wipe clean.
- Apply another coat of primer on puttied areas.
- Sand the surface with emery paper 320 and clean the surface with a cloth before painting.
Precautions
- Refer MSDS for “Nerolac Impressions Metallic Finish Wall Emulsion” for safety measures and precautions.
- Store in well ambient conditions, ventilated locations and away from sources of ignition and Fire.
- Keep away from children.
- In case of eye/skin contact wash with plenty of water
- Inhalation/Injection will cause danger. In either move to fresh air and consult medical practitioners in both the cases.
- Do not apply when the ambient temperature might drop to levels below 10 degrees C within 4 hrs of application.
- New plaster should be allowed to cure for minimum 12 weeks.
- Avoid extra thinning for better results.
- Can be tinted with Nerolac Hi-Power Universal Stainer before thinning. Do not add more than 5% of Nerolac Hi-Power Stainer. Stir the tinted paint well, after tinting and before application.
- The container must be tightly closed when not in use. Stir well and strain before use.
- Use safety equipment like rubber or polythene gloves, safety goggles/glasses, and Face mask.
Post Application Instructions
- Surfaces painted with Impressions Metallic Finish are washable by sponging with mild soap and water after a minimum of 2 weeks drying time to remove ordinary stains and everyday dirt
